5 Tier Black Wall Shelves - Vertical Floating Storage Shelf for Home Decor & Organization - Perfect for Bedroom, Living Room & Office - 30.7 Inch Space-Saving Design - Ideal for Books, Plants, Photos & Decorative Items

This is a very cute shelf. It is well made, an adorable color, easy to setup/install and is size-wise exactly what I was looking for.? Color ?The shelf is a nice baby pink color. Please see my pictures for reference.? Size ?The measurements are accurately reflected in the listing. It is small, but exactly what I was looking for to display my perfumes, crystals and candles. The distance between the individual shelves is about 4.75”.?Assembly ?Putting the shelf together was extremely easy and took me about 15 minutes. I’ve included a picture of the instructions. The back comes in 2 pieces and there are 5 shelves. You intersect the back pieces with 2 pegs to start, then add the pegs for the shelves to them and pop the shelves on. Then you flip the whole thing over (carefully!) and add all the screws that keep everything in place. I used a drill to do the last part, so it may take a bit longer if you are using a screw driver.? Installation ?The shelf is mounted on 2 screws. It comes with a paper strip that has 2 holes measured out to where the screws go, and 2 pieces of double sided tape on the other side. I measured the distance from the top hole to the top of the shelf to determine where on the wall to hang it. I then placed the paper strip accordingly and used a level to ensure it was straight.The shelf comes with 2 screws and 2 anchors. I used a small masonry drill bit (don’t remember the exact size but smaller than 1/4”) with a 20V drill to make the holes in the wall. As the instructions say - start with a small drill bit and work your way up, if the anchors don’t fit and you need to expand the hole. I can not stress this enough as I was about to jump straight to a 1/4” drill bit, which would have made too big of a hole.Once the holes were drilled I pushed the anchors in and used a screwdriver to manually screw in the screws (I was worried using a drill to screw them in might damage the anchors, which is why I went with a screwdriver). As stated in the instructions, I left about 1cm/0.39” of the screw sticking out. Lastly I slid the shelf onto the screws and done!